Grifn Gravel

Kanzo AllRoad GRX600 2x KAR01Cs(S)

The assembly of the product may differ from the photo. Be sure to check out the specifications.*
All-road geometry

All-road geometry

Two worlds, one bike

Two worlds, one bike

The maximum tire clearance of the Grifn is 40 millimetres in a 1x setup and 38 millimetres with a 2x setup.

The maximum tire clearance of the Grifn is 40 millimetres in a 1x setup and 38 millimetres with a 2x setup.

11 mounting points for personalised setup

11 mounting points for personalised setup

About Grifn Gravel

The Grifn is designed for riders looking for that one bike that can do it all. Whether it's competitive rides on smooth asphalt or commuting on crisp gravel paths, the Grifn is the all-road bike for all surfaces.

In the design, we combined the speed of a road bike with the comfort of a gravel bike. With a maximum tire clearance of 38mm (40mm with 1x drivetrain), you'll have traction on country roads, while 32mm allows you to assert your place in the peloton. Additionally, it's possible to connect fenders and a dynamo to the bike, ensuring you can go anywhere even in bad or dark weather.

The name Grifn refers to the mythical creature griffin, a mythological creature symbolizing dominion over heaven and earth. Therefore, the Grifn reigns over both asphalt and gravel. The geometry is tailored to the riding behavior that best suits the intended use of the bike and the terrain. There's ample comfort for long distances, and the bike is aggressive enough for competitive Gran Fondos.

In short, with the Grifn, we're essentially breaking the N+1 rule of bike ownership.

Start configuration
Grifn Gravel

All-road geometry

The geometry of the Ridley Grifn is the superb overlap of a stiff racing- and a tolerant off-road frame! The goal is a reactive and nimble riding feel while keeping a stable handling on off-road terrain. The head tube angle of the Grifn is slightly flatter than the head tube angle of a road bike. Compared to a gravel bike, the head tube angle is sharper. This results in a completely new geometry, specifically designed for the all-road segment. The riders of Classified Ridley were also consulted and gave positive feedback on this all-roader.
All-road geometry

Two worlds, one bike

With the Grifn family, you can hit the road as well as the off-road. You simply change wheelsets and do a gran fondo gravel on Saturday and hit the road the day after with the regular cycling club. With this family, you no longer need any other bikes. 

Two worlds, one bike

The maximum tire clearance of the Grifn is 40 millimetres in a 1x setup and 38 millimetres with a 2x setup.

The maximum tire clearance of the Grifn is 40 millimetres in a 1x setup and 38 millimetres with a 2x setup. This is a deliberate choice for a width sufficient to handle the vast majority of dirt roads. You can also opt for extra-wide tyres on the road, which provides a surplus of comfort and makes the Grifn ideal for long days in the saddle. 

The maximum tire clearance of the Grifn is 40 millimetres in a 1x setup and 38 millimetres with a 2x setup.

11 mounting points for personalised setup

The Grifn has 11 mounting points for a 100% personalised setup. With three mounting points on and under the down tube and three mounting points on the seat tube, you can fully determine the position of your bottle cages and frame bag. You also have two mounting points on the top tube for an extra bag or toolkit. You can cleverly hide these under a handy cover. 

11 mounting points for personalised setup

Design & Innovation Award 2022

The jury agrees: the Grifn can do it all. "If there was one word that Ridley had in mind when developing the Grifn allroad bike, it was versatility. Whether its gravel roads or alpine passes, with the right tires, the bike can do it all. Added to that is the Grifn’s low-key, classic looks", is what the jury concludes.

We’re very proud to be awarded the Design & Innovation Award, the Oscars of the bike and outdoor industries.

Design & Innovation Award 2022

Internal Dynamo Routing

The fork is equipped with internal cable routing for a dynamo hub. No more hassle with tape or tie-wraps to guide the cable from the dynamo hub to the front light as the cable is now nicely hidden inside the forkleg.

Internal Dynamo Routing

Special mudguards for the Grifn

Our product developers designed specific mudguards for the Grifn. You can order these and have them installed at your local dealer! That way, you can use your Grifn in all weather conditions and it is also fully suitable for commuting. 

Special mudguards for the Grifn

Integrated cable routing rear light

The frame offers the possibility to route the cable for a rear light internally inside the top tube where it will exit near the the seattube. At the same time these cable ports are nicely hidden so when not using them, you will hardly notice them on your frame.

Integrated cable routing rear light

UDH Hanger

The universal derailleur hanger (UDH) is the new standard in the cycling world. Not only is this derailleur hanger compatible with all modern shifting groups, it also protects against derailleur breakage and chain drops. In mountain biking, UDH has long been very common, and Ridley is bringing the technology to other segments as well.


UDH Hanger

Specifications

  • Frame
    Grifn, F-Steerer headtube, TA12x142mm, integrated dynamo routing
  • Material
    Carbon
  • Frame Level
    Essential Series
  • Max Tire Clearance 700c (*)
    38 mm
  • Paint Finish
    Glossy
  • Fork
    4ZA AllRoad , TA12x100 , Integrated dynamo routing , Fender mounts , Full Carbon
  • Groupset
    Shimano GRX600 2x11sp
  • Rear Derailleur
    Shimano GRX 810 , 11s , Medium Cage (34T)
  • Crank
    Shimano GRX600 , 11s , 172,5 , 46-30
  • Cassette
    Shimano 105 R7000 , 11s , 11-32
  • Front Derailleur
    Shimano GRX 810 , 2x11s , Braze-On
  • Brake Type
    Flat Mount
  • Wheelset
    Shimano RS171 DB , Shimano 11s , Clincher
  • Outer Tyre
    Vittoria Terreno Dry , 700x35c , TNT
  • Handlebar
    Deda Super Zero Gravel Alloy 40 RHM POB
  • Stem
    Forza Stratos , 90 mm , Black Glossy
  • Seatpost
    Forza Cirrus , Carbon-Alloy , 10mm Offset , 350mm , 27,2mm
  • Saddle
    Selle Italia Model X , Black
  • Range
    All-Road
  • Weight Limit
    110 KG (Bike included)

Geometry

What is my size?
I D B R A G C E S H J F
XS S M L XL
A 760 790 810 835 860
B 470 500 520 545 570
C 525 545 565 585 605
D 115 140 165 195 215
E 74.5 74 73.5 73.5 73
F 71.5 72 72 72 72
G 420 420 420 420 420
H 75 73 73 71 71
I 993 1005 1021 1043 1058
J
S 540 563 587 614 633
R 375 383 391 403 412

Every Ride Counts

Grifn Gravel

Meet our proud riders! They share photos of their new Grifn Gravel. Dive into this album for the top configurations and colors. The most stunning Ridleys worldwide, all in one place.

See them all

Let us inspire you!

Can’t decide between a few colors or designs? Would you like to see a certain design in more detail? Then check out some of these cool designs, selected to help you choose. Let us inspire you!

+ 141 photos

Help & support

How can we help?

Which hanger do I need?

The uses the SRAM Universal Derailleur Hanger (UDH). This means you will find easily a replacement hanger wherever you are as it is a standardised hanger (Ridley article code HANUDHSRA001)

What is the weight of a Grifn frame?

The weight of an unpainted frame is between 935gr and 1025gr depending on the size (tabel toevoegen)

What is the maximum tire clearance?

The maximum tire clearance of the Grifn is 40mm tires in combination with a 1x drivetrain, 38mm in combination with a 2x drivetrain and 32mm in combination with fenders. The width mentionned is the actual width of the tire on the rim.

What is the seatpost diameter?

The Grifn frame is designed for a 27,2mm round seatpost.

What TA is used on the bike?

The frame needs a 12mm TA with a thread of 1mm (Ridley article code QRET124ZA046)

Which seatpost clamp should be used on the frame
The integrated seatpost clamp (Ridley article code SPCINT4ZA003) for 27.2mm round seatpost is used on the Fenix SLiC, Fenix Disc, Ignite SLX, Kanzo Adventure and Grifn frameplatforms.
What brake mount is used?

The frame is developed for flatmount brakes for 140mm or 160mm rotors using an adapter.

Check stock

Can't get that new bike soon enough? Here you can find a dealer that has your dream bike in stock.

Beringen, BE

Other bikes

Contact us