Noah Disc 105 DI2 NHD02As(M)

Our carbon is manufactured by world market leader: Toray. The Japanese manufacturer is leader in every aspect of carbon development and supplier to absolute top world brands in many industries.

For the Essential Series, we use two types of carbon: 24T and 30T. The Elite Series, though, goes one step further and also uses 50T and 60T carbon. With the addition of these two carbons, combined with great effort, we can get the weight extremely low without compromising comfort and stiffness.

The Essential Series directly benefits from the carbon layup knowledge gained through the creation of the Elite Series. This means that our Essential Series reaches that same level of stiffness and comfort, albeit a slight bit heavier due to the use of 24T and 30T only which require more layers compared to 50T and 60T to reach the desired stiffness.

How can you ride faster without pedaling harder? How do objects "cut" through wind? While researching ways to improve aerodynamics, the bicycle industry began to gather knowledge from the aviation industry. From this, well-known NACA flight profiles, for designing wings and other components, began to be applied to the tubes of a bike frame.

With further research, our engineers found many additional potential optimisations. By shortening the end of the NACA profiles (F-Tubing), we discovered that drag was reduced. We also created a groove in the frame called the F-Surface Plus. By applying this technique, we created an airflow that flows more efficiently along the tube.

Want to know more about aerodynamics and NACA profiles? Read this blog!

At the bottom of the bike’s fork there are small, aerodynamic “wings” – hence, the name F-Wings.

Our engineers developed these fairings after extensive testing in the wind tunnel, where they noticed that the hub and its connection to the fork were causing turbulence. These F-Wings fairings ensure that this turbulent airflow flows smoothly again.

You can compare the F-Wings with the modern wings of an airplane, which are also referred to as 'broken wings' because their tips fold upwards. The tips allow aircrafts to save a lot of fuel because it significantly reduces turbulent air behind the wings. Now you see how our F-Wings have a significant impact on your fuel economy!

The rear end of a bike is crucial for both adding comfort and maximizing power transfer.

For added comfort, the seatstays are connected lower down on the seat tube. Due to this lower point of contact, both the seat tube and seatpost can more effectively filter out vibrations. In addition, the seatstays can provide more vertical flexibility. All this results in a more comfortable bike ride.

As for winning watts, the shape of the seatstays is oval with the widest side on the horizontal axis. This is key to maximizing power transfer. By placing this wide side horizontally, every watt produced is converted into speed, without losing power on the way to the rear wheel.